More products like this:
Every Medal Tells a Story — Medal Hanger Display
$55.00
Every medal has a story behind it
The one where you nearly stopped. The one where you surprised yourself. The one that took three attempts. This is where they live — where you see them, not folded in a drawer.
At a glance
Overall width
18 in (46 cm)
Steel gauge
3 mm, matte black powder coat
Hanging bars
3, halved for ribbon separation
Holds
60+ medals — tested, not estimated
Finish detail
Deburred laser-cut edges
Fixings
Included
Medal capacity
Ribbon width decides how much fits. Our measured figures:
Ribbon width
Medals per bar
Three bars
1.5 in standard
12–14
36–42
2 in wide
8–10
24–30
1 in narrow
18–20
54–60
Split bars keep ribbons in place rather than letting them gather in the middle. Most collections exceed 60 once medals begin to overlap.
Built not to bend
A 1.5 mm rack starts to curve somewhere around the thirtieth medal. Three millimetres does not. It is heavier to ship and more expensive to cut, and it is the reason the display still hangs straight in five years.
Putting it on the wall
Everything needed is in the box. What changes is the wall:
Into a stud — 3 mm pilot hole, screw goes straight in
Into drywall — 6 mm bit, use the supplied anchors, tap them flush first
Into masonry — masonry bit plus plugs, sourced separately
Gallery height is around 60 in to the top edge. Allow another 20–24 in below for medals to hang into.
You receive
One 18 in medal display rack, 3 mm black steel
Wall fixings — screws and anchors
Fitting instructions
Dispatch and delivery
Stocked in the United States. Most orders ship the next business day, with no import duties and no international transit time.
Who it is for
Runners, triathletes, swimmers, cyclists, martial artists, dancers and team athletes. The message is not sport-specific, which makes it a safe choice as a gift.
Floating wall mount
This one ships with three metal standoffs rather than flat screws. The standoffs hold the rack slightly off the wall, creating a shadow gap and a gallery-style floating effect — the detail that makes it read as deliberate rather than functional.
Storage that is also display
A medal organiser only has to keep things tidy. A wall-mounted display has to be worth looking at. This does both — it takes the collection out of storage without turning it into clutter.
Occasions
First race, comeback season, graduation, milestone birthday, Christmas, awards night. Free US shipping on orders over $99.
Layout options
Because each bar is split into halves, you can section the display instead of filling it end to end. Common groupings:
Chronological, oldest to newest
By event type — road, trail, track, championship
By distance, shortest at the top
Medals lift on and off individually, so the arrangement is not permanent.
Common questions
What is the real capacity?60+ medals. The variable is ribbon width: 12–14 per bar on standard 1.5-inch ribbon, 8–10 on wide championship ribbon.
Does it need a stud?No. Drywall anchors are included and hold a full load. A stud is stronger if one lines up, but it is not required.
Is the text printed?No — it is cut straight through the sheet. There is no ink or vinyl to peel.
Are the edges safe for ribbons?Yes. Laser-cut and deburred, so nothing catches or frays.
Does it work as medal storage as well as display?That is the point — wall mounting keeps medals untangled and unscratched, which a drawer does not.
Can I add a second rack later?Yes, they are designed to hang side by side at matching heights.
If it is not right
You have 15 days. Message us and we will make it right — replacement or refund, your choice.
Browse the full medal hanger collection, or the race bib and medal displays if you keep bibs as well as medals.
Never Give Up, Challenge Your Limits — Medal Holder
$55.00
The first line is what everyone says. The second is what it means.
A limit is not a wall — it is a number you have not tested yet. This version carries both lines, cut through the steel in two weights.
The medals underneath are the tests you passed.
Specifications
Width
18 in / 46 cm
Material
3 mm steel, powder-coated matte black
Bars
3, each split into halves
Capacity
60+ medals — tested, not estimated
Edges
Laser-cut and deburred
Mounting
Pre-drilled, hardware included
Capacity, by ribbon width
The limit is the ribbon, not the medal. Here is what fits:
Ribbon
Per bar
Total
1.5 in — typical road race
12–14
36–42
2 in — championship and finisher
8–10
24–30
1 in — school and club events
18–20
54–60
Because the bars are halved, ribbons hang in lanes rather than sliding into one pile. Layering medals adds more on top of these figures.
About the gauge
Three millimetres is roughly double what a budget rack uses. The practical effect: no visible bow at 40, 50 or 60 medals, and no permanent sag once the weight comes off.
Mounting
Pre-drilled holes, screws and wall anchors are included. Drill sizes by wall type:
Stud: 3 mm pilot hole, drive the screw directly. Strongest option.
Drywall: 6 mm bit with the supplied anchors, tapped flush before driving.
Brick or concrete: masonry bit and plugs, bought separately — drywall anchors will not hold.
Hang the top edge at roughly 60 in / 152 cm from the floor and leave 20–24 in of clear wall beneath for the medals.
In the package
18-inch medal rack in powder-coated 3 mm steel
Mounting hardware
Instructions
Shipping
Every order leaves our Illinois warehouse, usually within a business day. Domestic delivery means no customs paperwork and no surprise charges.
Who it is for
Athletes across any sport, and particularly those training through setbacks. Popular as a gift for someone coming back from an injury year.
Also available
A cleaner version with the three words alone — Never Give Up.
Trophies as well as medals?
Hang a trophy shelf above and this rack 8–10 in beneath. The shelf carries what stands; the rack carries what hangs. Together they read as one wall.
Organising, not just displaying
Wall mounting is the only medal storage that does not involve untangling something first. Separated bars, nothing stacked, nothing abrading.
Bought as a present?
Motto designs are the safer choice when you do not know the sport. Sport-specific designs land better when you do. Free US shipping applies over $99.
Frequently asked questions
How many medals does an 18-inch rack hold?Sixty or more, depending on ribbon width. Standard 1.5-inch race ribbons fit 12–14 per bar; wide championship ribbons around 8–10.
Can I mount it on drywall without a stud?Yes. The supplied anchors carry a fully loaded rack. Use a 6 mm bit, tap them flush, and avoid overtightening.
Will the finish chip or fade?The lettering is cut through the steel rather than printed, so there is nothing to scratch off. Powder coat is heat-cured and resists chipping far better than paint.
Do the edges damage ribbons?No. Every edge is laser-cut and deburred.
Can I use it with a trophy shelf?Yes. Mount the shelf above and this rack 8–10 in below, so medals hang clear of the shelf edge.
What happens when it fills up?The racks hang side by side. A second one lines up cleanly, and most collections need one eventually.
Guarantee
Backed by our 15-day satisfaction guarantee. If it is not right, message us and we will sort it out.
Browse the full medal hanger collection, or the race bib and medal displays if you keep bibs as well as medals.
She Believed She Could So She Did — Medal Hanger
$55.00
She believed she could, so she did
The line gets printed on a lot of things. Here it is cut through 3 mm of steel, with the proof hanging underneath it.
Specifications
Width
18 in / 46 cm
Material
3 mm steel, powder-coated matte black
Bars
3, each split into halves
Capacity
60+ medals — tested, not estimated
Edges
Laser-cut and deburred
Mounting
Pre-drilled, hardware included
Capacity, by ribbon width
The limit is the ribbon, not the medal. Here is what fits:
Ribbon
Per bar
Total
1.5 in — typical road race
12–14
36–42
2 in — championship and finisher
8–10
24–30
1 in — school and club events
18–20
54–60
Because the bars are halved, ribbons hang in lanes rather than sliding into one pile. Layering medals adds more on top of these figures.
About the gauge
Three millimetres is roughly double what a budget rack uses. The practical effect: no visible bow at 40, 50 or 60 medals, and no permanent sag once the weight comes off.
Mounting
Pre-drilled holes, screws and wall anchors are included. Drill sizes by wall type:
Stud: 3 mm pilot hole, drive the screw directly. Strongest option.
Drywall: 6 mm bit with the supplied anchors, tapped flush before driving.
Brick or concrete: masonry bit and plugs, bought separately — drywall anchors will not hold.
Hang the top edge at roughly 60 in / 152 cm from the floor and leave 20–24 in of clear wall beneath for the medals.
In the package
18-inch medal rack in powder-coated 3 mm steel
Mounting hardware
Instructions
Shipping
Every order leaves our Illinois warehouse, usually within a business day. Domestic delivery means no customs paperwork and no surprise charges.
Who it is for
Runners, swimmers, gymnasts, dancers, martial artists, cyclists and team athletes — any sport, any distance. Works for a first 5K as well as a tenth marathon, and as a gift for a daughter’s first season.
Also available
The male version — He Believed He Could So He Did.
From storage to display
Medals kept in a box scratch, tangle and get forgotten. Wall-mounted, they take no floor space, stay untangled, and stop being a storage problem entirely.
Buying it as a gift
It sells well for graduations, birthdays, Christmas and end-of-season awards nights. If you are buying for someone whose sport you are not sure about, choose a motto design rather than a sport-specific one.
Orders over $99 ship free within the US.
Grouping the collection
Split bars mean you can section the wall rather than fill it. Group by season, by distance, or by the races that changed something. Medals lift off individually, so nothing is locked in.
Frequently asked questions
How many medals does an 18-inch rack hold?Sixty or more, depending on ribbon width. Standard 1.5-inch race ribbons fit 12–14 per bar; wide championship ribbons around 8–10.
Can I mount it on drywall without a stud?Yes. The supplied anchors carry a fully loaded rack. Use a 6 mm bit, tap them flush, and avoid overtightening.
Will the finish chip or fade?The lettering is cut through the steel rather than printed, so there is nothing to scratch off. Powder coat is heat-cured and resists chipping far better than paint.
Do the edges damage ribbons?No. Every edge is laser-cut and deburred.
Can I use it with a trophy shelf?Yes. Mount the shelf above and this rack 8–10 in below, so medals hang clear of the shelf edge.
What happens when it fills up?The racks hang side by side. A second one lines up cleanly, and most collections need one eventually.
Guarantee
Backed by our 15-day satisfaction guarantee. If it is not right, message us and we will sort it out.
Browse the full medal hanger collection, or the race bib and medal displays if you keep bibs as well as medals.
Always Earned, Never Given — Medal Display Case
$55.00
Always earned. Never given.
Four words that separate the people who showed up from the people who talked about showing up. The medals underneath are the receipt.
At a glance
Overall width
18 in (46 cm)
Steel gauge
3 mm, matte black powder coat
Hanging bars
3, halved for ribbon separation
Holds
60+ medals — tested, not estimated
Finish detail
Deburred laser-cut edges
Fixings
Included
Medal capacity
Ribbon width decides how much fits. Our measured figures:
Ribbon width
Medals per bar
Three bars
1.5 in standard
12–14
36–42
2 in wide
8–10
24–30
1 in narrow
18–20
54–60
Split bars keep ribbons in place rather than letting them gather in the middle. Most collections exceed 60 once medals begin to overlap.
Built not to bend
A 1.5 mm rack starts to curve somewhere around the thirtieth medal. Three millimetres does not. It is heavier to ship and more expensive to cut, and it is the reason the display still hangs straight in five years.
Putting it on the wall
Everything needed is in the box. What changes is the wall:
Into a stud — 3 mm pilot hole, screw goes straight in
Into drywall — 6 mm bit, use the supplied anchors, tap them flush first
Into masonry — masonry bit plus plugs, sourced separately
Gallery height is around 60 in to the top edge. Allow another 20–24 in below for medals to hang into.
You receive
One 18 in medal display rack, 3 mm black steel
Wall fixings — screws and anchors
Fitting instructions
Dispatch and delivery
Stocked in the United States. Most orders ship the next business day, with no import duties and no international transit time.
Who it is for
Athletes across any sport — runners, swimmers, cyclists, tennis players, martial artists, wrestlers, gymnasts, dancers and team players.
Floating wall mount
This one ships with three metal standoffs rather than flat screws, holding the rack slightly off the wall for a shadow gap and a gallery-style floating effect.
Arranging your collection
The staggered bars let you group rather than just fill:
By year — one bar per season, so progress reads left to right
By distance — shorter races on the top bar, longer ones below
By significance — the races that mattered in the centre, everything else around them
Ribbons hang in lanes rather than sliding together, so regrouping later takes a minute rather than an afternoon.
Loaded weight
Roughly 8 lb (3.5 kg) fully loaded, of which the rack itself is 1.2 lb (550 g). Nothing that troubles standard drywall fixings.
Trophies as well as medals?
Hang a trophy shelf above and this rack 8–10 in beneath. The shelf carries what stands; the rack carries what hangs. Together they read as one wall.
Common questions
What is the real capacity?60+ medals. The variable is ribbon width: 12–14 per bar on standard 1.5-inch ribbon, 8–10 on wide championship ribbon.
Does it need a stud?No. Drywall anchors are included and hold a full load. A stud is stronger if one lines up, but it is not required.
Is the text printed?No — it is cut straight through the sheet. There is no ink or vinyl to peel.
Are the edges safe for ribbons?Yes. Laser-cut and deburred, so nothing catches or frays.
Does it work as medal storage as well as display?That is the point — wall mounting keeps medals untangled and unscratched, which a drawer does not.
Can I add a second rack later?Yes, they are designed to hang side by side at matching heights.
If it is not right
You have 15 days. Message us and we will make it right — replacement or refund, your choice.
Browse the full medal hanger collection, or the race bib and medal displays if you keep bibs as well as medals.
Nothing is Impossible — Medal Holder Wall Display
$55.00
Nothing is impossible. The word itself says I’m possible.
It is a line people quote easily and prove rarely. The medals underneath it are the difference — each one a thing that looked out of reach until it was not.
Specifications
Width
18 in / 46 cm
Material
3 mm steel, powder-coated matte black
Bars
3, each split into halves
Capacity
60+ medals — tested, not estimated
Edges
Laser-cut and deburred
Mounting
Pre-drilled, hardware included
Capacity, by ribbon width
The limit is the ribbon, not the medal. Here is what fits:
Ribbon
Per bar
Total
1.5 in — typical road race
12–14
36–42
2 in — championship and finisher
8–10
24–30
1 in — school and club events
18–20
54–60
Because the bars are halved, ribbons hang in lanes rather than sliding into one pile. Layering medals adds more on top of these figures.
About the gauge
Three millimetres is roughly double what a budget rack uses. The practical effect: no visible bow at 40, 50 or 60 medals, and no permanent sag once the weight comes off.
Mounting
Pre-drilled holes, screws and wall anchors are included. Drill sizes by wall type:
Stud: 3 mm pilot hole, drive the screw directly. Strongest option.
Drywall: 6 mm bit with the supplied anchors, tapped flush before driving.
Brick or concrete: masonry bit and plugs, bought separately — drywall anchors will not hold.
Hang the top edge at roughly 60 in / 152 cm from the floor and leave 20–24 in of clear wall beneath for the medals.
In the package
18-inch medal rack in powder-coated 3 mm steel
Mounting hardware
Instructions
Shipping
Every order leaves our Illinois warehouse, usually within a business day. Domestic delivery means no customs paperwork and no surprise charges.
Who it is for
Athletes across any sport. The message is not tied to a discipline, which makes it a safe choice when you do not know which sport to buy for.
From storage to display
Medals kept in a box scratch, tangle and get forgotten. Wall-mounted, they take no floor space, stay untangled, and stop being a storage problem entirely.
Buying it as a gift
It sells well for graduations, birthdays, Christmas and end-of-season awards nights. If you are buying for someone whose sport you are not sure about, choose a motto design rather than a sport-specific one.
Orders over $99 ship free within the US.
Grouping the collection
Split bars mean you can section the wall rather than fill it. Group by season, by distance, or by the races that changed something. Medals lift off individually, so nothing is locked in.
Frequently asked questions
How many medals does an 18-inch rack hold?Sixty or more, depending on ribbon width. Standard 1.5-inch race ribbons fit 12–14 per bar; wide championship ribbons around 8–10.
Can I mount it on drywall without a stud?Yes. The supplied anchors carry a fully loaded rack. Use a 6 mm bit, tap them flush, and avoid overtightening.
Will the finish chip or fade?The lettering is cut through the steel rather than printed, so there is nothing to scratch off. Powder coat is heat-cured and resists chipping far better than paint.
Do the edges damage ribbons?No. Every edge is laser-cut and deburred.
Can I use it with a trophy shelf?Yes. Mount the shelf above and this rack 8–10 in below, so medals hang clear of the shelf edge.
What happens when it fills up?The racks hang side by side. A second one lines up cleanly, and most collections need one eventually.
Guarantee
Backed by our 15-day satisfaction guarantee. If it is not right, message us and we will sort it out.
Browse the full medal hanger collection, or the race bib and medal displays if you keep bibs as well as medals.